NOTE: The procedure to install standard, high performance (silver grade), or high performance (gold grade) fan module
is same.
2. Press the touch point on the cooling fan module until firmly connected.
Figure 32. Installing a cooling fan module
Next steps
1. If removed, install the air shroud.
2. Follow the procedure listed in After working inside your system.
Drives
Removing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. If installed, remove the front bezel.
CAUTION: To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
Steps
Press the release button, and slide the drive blank out of the drive slot.
Installing and removing system components
43
To Next Page
Loading...
