Dell EMC PowerProtect DD6400 System - Page 46

# disk show state
Enclosure Disk
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
--------- -------------------------------------------------
1 . . . . . . . . . . . .
2 . . . . . . . . . . . . . . s
3 . . . . . . . . . . . . . . s
--------- -------------------------------------------------
Legend State Count
------ --------------- -----
. In Use Disks 40
s Spare Disks 2
------ --------------- -----
Total 42 disks
● For a new ES40:
# disk show state
Enclosure Disk
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
--------- -------------------------------------------------
1 . . . . . . . . . . . .
2 . . . . . . . . . . . . . . .
3 . . . . . . . . . . . . . . .
--------- -------------------------------------------------
Legend State Count
------ --------------- -----
. In Use Disks 42
------ --------------- -----
Total 42 disks
4. Display the current alerts on the system.
Run the following command: alerts show current
# alerts show current
No active alerts.
5. Resolve all displayed alerts.
46
Add Storage Capacity