EasyManua.ls Logo

Dell EMC PowerSwitch N3000E-ON Series - Page 13

Dell EMC PowerSwitch N3000E-ON Series
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Upgrade Dell EMC Networking N3000E-ON Switches
Page 9
4. Activate 6.5.3.36 (Advanced) firmware on N3000E-ON switch.
5. Reload the switch.
6. Download the 6.5.3.36 firmware image (N3100Advv6.5.3.36.stk) to N3132PX-ON switch.
NOTE: Activate the image to use as the boot (active) image after the switch
resets. Images on the N3000E-ON switch is named as active and backup.
7. Activate 6.5.3.36 (Advanced) firmware on N3132PX-ON switch.
8. Reload the switch.
9. After switch reloaded, download and activate the mixed-stack firmware image
(N3000N3100Advv6.5.3.36.itb) on N3000E-ON and N3132PX-ON switches.
10. Reload the switches again.
11. Power OFF both N3000E-ON and N3132PX-ON switches. Plug-in mini-SAS stack cables and form the
stack between N3000E-ON and N3132PX-ON switches.
12. Power ON stack (N3000E-ON with N3132PX-ON).
13. Verify the stack of N3000E-ON and N3132PX-ON switches via show switch and show version command
output like below:
Console#show switch
Management Standby Preconfig Plugged-in Switch Code
SW Status Status Model ID Model ID Status Version
--- ---------- --------- ------------- ------------- ------------- -----------
1 Stack Mbr Oper Stby N3132PX-ON N3132PX-ON OK 6.5.3.36
2 Mgmt Sw N3048EP-ON N3048EP-ON OK 6.5.3.36
Console#show version
Machine Description............... Dell EMC Networking Switch
System Model ID................... N3048EP-ON
Machine Type...................... Dell EMC Networking N3048EP-ON
Serial Number.....................
Manufacturer...................... 0xbc00
Burned In MAC Address............. 0090.BC06.A571
System Object ID.................. 1.3.6.1.4.1.674.10895.3060
SOC Version....................... BCM56340_A0
HW Version........................ 5
CPLD Version...................... 20
Image File........................ N3000Advv6.5.3.36
Software Capability............... Stack Limit = 12, VLAN Limit = 4093
unit active backup current-active next-active
---- ----------- ----------- -------------- --------------
1 6.5.3.36 6.5.3.36 6.5.3.36 6.5.3.36
2 6.5.3.36 6.5.3.36 6.5.3.36 6.5.3.36

Related product manuals