Dell EqualLogic PS-M4110 - 3 Installing an Array

13
3 Installing an Array
The PS-M4110 storage blade array can operate only when properly installed in a Dell PowerEdge PowerEdge
M1000e Blade Enclosure. The M1000e chassis provides power and network connectivity for the PS-M4110
array.
The PowerEdge M1000e Blade Enclosure has 16 single-wide half-height slots.
The PS-M4110 storage blade array is double-wide and half-height.
You can install up to four PS-M4110 blade arrays (shown in Figure 4) in a PowerEdge M1000e Blade Enclosure
(shown in Figure 5). Arrays can be installed in any available top or bottom slots in the M1000e chassis.
Figure 4: PS-M4110 Blade Storage Array