Dell EqualLogic PS-M4110 - Getting Started

1
1 Getting Started
This section provides information to help you get started with installing your PS-M4110 blade storage array in a
Dell PowerEdge M1000e Blade Enclosure. Please review this section before beginning the installation.
An example of a fully-populated Dell PowerEdge M1000e Blade Enclosure is shown in Figure 1. It contains four
PS-M4110 blade storage arrays, two single-wide full-height servers, and four single-wide half-height servers.
Figure 1: Fully-populated Dell PowerEdge M1000e Blade Enclosure