Dell EqualLogic PS-M4110 Installation Guide
If installing the array into a bottom slot in the M1000e chassis
Figure 7: Installing the Array in a Bottom Slot
3.
Push the PS-M4110 array into the slot until the array handle opens. To push, place your thumbs on the front
sides of the array, on the array's metal housing, as shown in Figure 8.
–
Do not push on the plastic front of the array drawer.
–
Stop pushing when the array handle slides open.
–
The handle will open towards you when the array is inserted most of the way into the slot.
Note: If installing the array into a top slot, the top array handle opens; in a bottom slot, the bottom
array handle opens.
To Next Page
Loading...
