Installation and Setup Installing Array Hardware
2–12
Figure 2-5: Connecting a Serial Cable to a PS5000
After completing the PS5000 hardware installation, see Chapter 3, Software
Configuration.
PS5500 Hardware Installation
The following sections describe the PS5500 hardware installation.
Before You Begin to Install a PS5500
You must meet these prerequisites before beginning a PS5500 installation:
• Make sure the array and installation location meet the environmental
requirements. See PS5500 Environmental Requirements on page 2-13.
• Gather all the required hardware. See PS5500 Shipping Box Contents and
Required Hardware on page 2-14.
• Rack mount the array. See PS5500 Rack Mount Requirement on page 2-15.
To Next Page
Loading...
