Dell EqualLogic PS5000 - Using the GUI to Create a Volume

Installation and Setup Using the SAN
4–3
Using the GUI to Create a Volume
To use the GUI to create a volume, follow these steps:
1. Log in to the group.
Specify the group IP address in a Web browser. Then, in the login dialog box
(Figure 3-2), enter the
grpadmin account name and the password that you
specified when creating the group.
2. In the Group Summary window (Figure 3-7), click
Create volume in the
Activities panel.
2. In the Create Volume – Volume Settings dialog box (Figure 4-1), enter the
volume name and an optional description and click
Next.
Figure 4-1: Create Volume – Volume Settings