Dell FORCE10 Open Automation User Manual

Virtual Server Networking CLI | 61
package uninstall
Remove an installed Open Automation package, such as Virtual Server Networking,
from the system.
Syntax
package uninstall name
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
Usage
Information
Uninstalling the VSN package removes it from the internal flash memory on the
switch. To follow the progress when removing a package from the system, enter the
show packages command.
Related
commands
name Enter the name of the Open Automation package, exactly as it
appears in the show packages list.
Version 8.3.8.0 Introduced on the S4810.
Version 8.3.5.1 Introduced on the S55.
Version 8.3.3.4 Introduced on the S60.
Caution: Before you uninstall the Virtual Server Networking package, you must first stop all
scripts that are currently running using the
no script script-name command.
show packages Display all the packages installed in the system.

Dell FORCE10 Open Automation Specifications

General

Series	FORCE10
Model	Open Automation
Jumbo Frame Support	Yes
Product Type	Switch
Ports	Varies by model
Switching Capacity	Varies by model
Forwarding Rate	Varies by model
MAC Address Table Size	Varies by model
Power Supply	Varies by configuration
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Dimensions	Varies by model
Weight	Varies by model