Virtual Server Networking CLI | 67
show vmmap
Display the virtual machines accessed on a switch interface.
Syntax
show vmmap interface
Defaults
None
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
The show vmmap command displays information on the virtual machines accessed on a
switch interface, including the virtual machine name, VMAC address, and
corresponding VLAN ID
Related
Commands
Example
FTOS#show vmmap gigabitethernet 0/32
VM Name VIF Vlan ID
Redhat_207_03_nfs 00:0c:29:4f:66:19 -
Redhat_207_03_nfs 00:50:56:92:00:77 138
interface Display information on the virtual machines accessed on a specified
interface. Enter one of the following interface types:
• For a 100/1000 Ethernet interface or 1-Gigabit Ethernet interface,
enter: GigabitEthernet slot/port
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet slot/port
• For a port-channel interface, enter:
port-channel number
Where the valid port-channel numbers are 1 to 128.
Version 8.3.8.0 Introduced on the S4810.
Version 8.3.5.1 Introduced on the S55.
Version 8.3.3.4 Introduced on the S60.
hypervisor Define a hypervisor instance.
Note: In show vmmap output, VLAN 1 is displayed as VLAN ID 1; VLAN 4095 is
displayed without a VLAN ID as "- "
To Next Page
Loading...
Need help?
General
