66 | Virtual Server Networking CLI
www.dell.com | support.dell.com
The following command output displays information on the hypervisor session
established on virtual switch vSwitch3 on a VMware server connected to the
interface 0/32.
FTOS#show virtualswitch Gigabitethernet 0/32 vSwitch3
Interface :Gi 0/32
Hypervisor Type :vmware
Hypervisor Name :vmware207
Hypervisor Version :4.1.0
Virtual Switch :vSwitch3
Port groups :
Name :VLAN 3
Vlan Id :138
VIFs:
MAC MTU
00:50:56:92:00:77 8000
Name :VM Network 4
Vlan Id :-
VIFs:
MAC MTU
00:0c:29:4f:66:19 8000
PIFs:
MAC MTU
00:26:55:dd:01:4f 8000
Note: In show virtualswitch output, VLAN 1 is displayed as VLAN ID 1; VLAN 4095 is
displayed without a VLAN ID as "- "
To Next Page
Loading...
