Dell Force10 S4820T System User Manual

About this Guide 1
About this Guide
This document is intended as a Getting Started Guide to get new systems up and
running and ready for configuration. For complete installation and configuration
information, refer to the documents listed in
Table 1-1 .
Table 1-1. S4820T Documents
Information Documentation
Hardware installation and power-up
instructions
Installing the S4820T System
Software configuration FTOS Configuration Guide for the S4820T
System
Command line interface FTOS Command Line Reference Guide for
the S4820T System
Latest updates FTOS Release Notes for the S4820T System

Dell Force10 S4820T System Specifications

General

Switching Capacity	1.28 Tbps
Forwarding Rate	952 Mpps
Power Supply	Dual, hot-swappable
Rack Units	1U
Airflow	Front-to-back or back-to-front
Manageable	Yes
Form Factor	Rack-mountable
RAM	4 GB
MAC Address Table Size	128, 000 entries
Operating Temperature	32°F to 104°F (0°C to 40°C)
Uplink Ports	4 x 40GbE QSFP+
Jumbo Frames	9216 bytes
Dimensions (H x W x D)	4.32 cm x 44.3 cm x 50.8 cm
Storage Temperature	-40°C to 70°C
Latency	650 ns
Weight	22.05 lbs (10 kg)
Relative Humidity	10% to 85% (non-condensing)