Steps
1 Align the notches on the solid-state drive/Intel Optane memory module with the solid-state drive/Intel Optane memory module slot on
the system board.
2 Slide the solid-state drive/Intel Optane memory module into the solid-state drive/Intel Optane memory module slot on the system
board.
3 Install the screw (M2x3) that secures the solid-state drive/Intel Optane memory module to the system board.
Next step
1 Install the battery.
2 Install the base cover.
3 Follow the procedure in After working inside your computer.
Identifier GUID-2CFF108D-02DC-40AF-BD5A-C4C22584A457
Status Released
Hard drive
Removing and installing components
23
To Next Page
Loading...
