Steps
1 Connect the antenna cables to the WLAN card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card Antenna-cable color
Main (white triangle) White
Auxiliary (black triangle) Black
2 Align the notch on the WLAN card with the tab on the WLAN card slot and insert the WLAN card at an angle into the WLAN card slot.
3 Align and place the WLAN card bracket on the WLAN card.
4 Replace the screw (M2x3) to secure the WLAN card to the system board.
Next step
1 Install the battery.
2 Install the base cover.
3 Follow the procedure in After working inside your computer.
Identifier GUID-FCFD0001-7CDA-44E5-ACBB-F3DB60FC0CFF
Status Released
Power-adapter port
38
Removing and installing components
To Next Page
Loading...
