Steps
1 Align and place the right fan on the palm-rest and keyboard assembly.
2 Connect the right-fan cable to the system board.
3 Attach the tape to the right fan to secure it to the system board.
4 Replace the two (M2x3) screws to secure the right fan to the palm-rest and keyboard assembly.
Next step
1 Install the battery.
2 Install the base cover.
3 Follow the procedure in After working inside your computer.
Identifier GUID-A6445DA5-405C-4BDA-A929-FE53DC4A83F6
Status Released
Speakers
Identifier GUID-6EC19481-56D5-44BB-B938-42C32B80A46A
Status Released
Removing the speakers
Prerequisites
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover.
3 Remove the battery.
About this task
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
34
Removing and installing components
To Next Page
Loading...
