About this task
The following image indicates the location of the WLAN card and provides a visual representation of the removal procedure.
Steps
1 Remove the screw (M2x3) that secures the WLAN card to the system board.
2 Remove the bracket that secures the WLAN card to the system board.
3 Disconnect the antenna cables from the WLAN card.
4 Slide and remove the WLAN card from the WLAN card slot.
Identifier GUID-CC33136C-1B6C-439B-8202-1AAB1DF041DE
Status Released
Installing the WLAN card
Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the installation procedure.
Removing and installing components
37
To Next Page
Loading...
