Dell Inspiron 13 5000 - Removing the Status-Light Board; Prerequisites; Procedure

Removing the status-light
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
Procedure
1 Peel off the pieces of tape securing the speaker cable to the palm-rest
assembly.
2 Remove the speaker cable from the routing guides on the palm-rest
assembly.
55