Replacing the palm rest and
keyboard assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
Place the palm-rest and keyboard assembly on a flat surface with the
keyboard facing down.
Post-requisites
1 Replace the system board.
2 Replace the power-adapter port.
3 Replace the display assembly.
4 Replace the speakers.
5 Replace the status-light board.
6 Replace the power and volume-buttons board.
7 Replace the I/O board.
8 Replace the heat sink.
9 Replace the fan.
10 Replace the touch pad.
11 Replace the keyboard daughter-board.
12 Replace the wireless card.
13 Replace the hard drive.
14 Replace the coin-cell battery.
15 Replace the memory modules.
16 Replace the battery.
17 Replace the base cover.
83
To Next Page
Loading...
