Table 4. System setup options — System information menu (continued)
Overview
Microcode Version Displays the microcode version.
Intel Hyper-Threading Capable Displays whether the processor is Hyper-Threading (HT) capable or not.
64-Bit Technology Displays whether 64-bit technology is used or not.
Memory Information
Memory Installed Displays the total computer memory installed.
Memory Available Displays the total computer memory available.
Memory Speed Displays the memory speed.
Memory Channel Mode Displays single or dual channel mode.
Memory Technology Displays the technology that is used for the memory.
Devices Information
Panel Type Displays the Panel Type of the computer.
Video Controller Displays the video controller information of the computer.
Video Memory Displays the video memory information of the computer.
Wi-Fi Device Displays the wireless device information of the computer.
Native Resolution Displays the native resolution of the computer.
Video BIOS Version Displays the video BIOS version of the computer.
Audio Controller Displays the audio controller information of the computer.
Bluetooth Device Displays the Bluetooth device information of the computer.
dGPU Video Controller Displays the discrete video controller information of the computer.
Table 5. System setup options — Boot Configuration menu
Boot Configuration
Boot Sequence
Boot mode Displays the boot mode of the computer.
Boot Sequence Specifies the order that the BIOS searches the list of devices to find an
operating system to boot.
By default, Windows Boot Manager option is selected.
By default, UEFI RST BC711 NVMe SK hynix 512GB YB7N00761500772Q
option is selected.
By default, UEFI HTTPs Boot option is selected.
Table 6. System setup options — Integrated Devices menu
Integrated Devices
Date/Time
Date Sets the computer date in MM/DD/YYYY format. Changes to the date take
effect immediately.
Time Sets the computer time in HH:MM:SS 24-hour format. You can switch
between 12-hour and 24-hour clock. Changes to the time take effect
immediately.
Camera
Enable Camera Enables or disables the camera.
By default, the option is enabled.
BIOS setup 69
To Next Page
Loading...
