Dell Inspiron 14 7430 2-in-1 - Page 79

Table 30. System setup options—Storage menu
Storage
Storage interface
Port Enablement This page allows you to enable the onboard drives.
By default, the M.2 PCIe SSD option is enabled.
Drive Information
M.2 PCIe SSD
Type Displays the M.2 PCIe SSD type information of the system.
Device Displays the M.2 PCIe SSD device information of the system.
Table 31. System setup options—Display menu
Display
Display Brightness
Brightness on battery power Enable to set screen brightness when the system is running on battery power.
Brightness on AC power Enable to set screen brightness when the system is running on AC power.
Table 32. System setup options—Connection menu
Connection
HTTP(s) Boot Feature
HTTP(s) Boot Enable or disable the HTTP(s) Boot feature.
By default, the HTTPs Boot option is disabled.
HTTP(s) Boot Modes Select the HTTP(s) boot mode.
By default, the Auto Mode option is disabled.
Table 33. System setup options—Passwords menu
Passwords
Admin Password Set, change, or delete the administrator password.
M.2 PCIe SSD-0 Set, change, or delete the NVMe SSD0 password.
Table 34. System setup options—Update, Recovery menu
Update, Recovery
SupportAssist OS Recovery Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain system errors.
By default, the option is enabled.
BIOSConnect Enable or disable cloud Service operating system recovery if the main operating
system fails to boot with the number of failures equal to or greater than the
value specified by the Auto operating system Recovery Threshold setup option
and local Service operating system does not boot or is not installed.
By default, the option is enabled.
Dell Auto operating system Recovery
Threshold
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery Tool.
By default, the threshold value is set to 2.
BIOS setup 79