Removing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
Procedure
1 Locate the wireless card on the system board.
2 Remove the screw (M2x3) that secures the wireless-card bracket to the wireless
card and the system board.
3 Remove the wireless-card bracket from the wireless card.
4 Using a plastic scribe, disconnect the antenna cables from the wireless card.
40
To Next Page
Loading...
