Dell Inspiron 14-7472 - Replacing the Status-Light Board; Procedure; Post-Requisites

Replacing the status-light board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw hole on the status-light board with the screw hole on the palm
rest and keyboard assembly.
2 Replace the screw (M2x3) that secures the status-light board to the palm rest
and keyboard assembly.
3 Slide the status-light board cable into the connector on the status-light board
and close the latch to secure the cable.
Post-requisites
1 Replace the battery.
2 Replace the base cover.
60