Steps
Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest
and keyboard assembly.
Next steps
1. Install the power-adapter port.
2. Install the system board.
3. Install the touchpad.
4. Install the display assembly.
5. Install the power button.
6. Install the fan.
7. Install the heat sink.
8. Install the speakers.
9. Install the memory modules.
10. Install the hard drive assembly.
11. Install the I/O board.
12. Install the wireless card.
13. Install the M.2 2230 solid-state drive.
14. Install the M.2 2280 solid-state drive.
15. Install the battery.
16. Install the base cover.
17. Install the SD card.
18. Follow the procedure in After working inside your computer.
Removing and installing components
71
To Next Page
Loading...
