Replacing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align and place the display cable on the display back-cover and antenna
assembly.
2 Route the display cable through the routing guides on the display back-cover and
antenna assembly.
Post-requisites
1 Replace the display panel.
2 Replace the display hinges.
3 Replace the display bezel.
4 Replace the display assembly.
5 Replace the computer base.
6 Replace the wireless card.
7 Replace the rear cover.
8 Replace the battery.
9 Replace the base cover.
113
To Next Page
Loading...
