Replacing the battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Slide the battery in the slot on the computer base and align the screw holes on
the battery with the screw holes on the computer base.
2 Replace the three screws (M2.5x6) that secure the battery to the computer
base.
Post-requisites
Replace the base cover.
22
To Next Page
Loading...
