Replacing the palm rest
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
Place the palm rest on a at surface.
Post-requisites
1 Replace the ngerprint-reader board.
2 Replace the power-button board.
3 Replace the keyboard.
4 Replace the touchpad.
5 Replace the display assembly.
6 Replace the computer base.
7 Replace the wireless card.
8 Replace the rear cover.
9 Replace the battery.
10 Replace the base cover.
93