Replacing the solid-state drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the
solid-state drive.
Procedure
1 Place the solid-state drive on the slot on the computer base.
2 Align the notch on the solid-state drive with the tab on the solid-state drive slot
and slide the solid-state drive into the solid-state drive slot.
3 Press the other end of the solid-state drive to align the screw hole on the solid-
state drive with the screw hole on the computer base.
28
To Next Page
Loading...
