Display panel
Removing the display panel
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the stand.
3. Remove the back cover.
4. Remove the I/O cover.
5. Remove the hard drive.
6. Remove the system-board shield.
7. Remove the memory module.
8. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive, as applicable.
9. Remove the wireless card.
10. Remove the heat sink.
11. Remove the system board.
About this task
The following image indicates the location of display panel and provides a visual representation of the removal procedure.
Removing and installing components 59
To Next Page
Loading...
