Removing the 2.5-inch hard drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
Remove the computer cover.
Procedure
1 Disconnect the power cables and the data cables from the hard drive.
2 Remove the screw (#6-32xL3.6) that secures the hard-drive assembly to the drive cage.
3 Slide and lift the hard-drive assembly out of the slot on the drive cage.
10
20 Removing the 2.5-inch hard drive