Removing the optical drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the computer cover.
2 Remove the front bezel.
Procedure
1 Place the computer on its side to access the parts inside the chassis.
2 Remove the two screws (#6-32xL6.35) that secure the drive cage to the chassis.
3 Push the release tab on the chassis and slide the drive cage to release it from the chassis
4 Disconnect the data cable and power cable from the optical drive.
5 Disconnect the data cables and power cables from the hard drives.
14
28 Removing the optical drive