Replacing the thermal-cooling assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the captive screws on the thermal-cooling assembly with the screw holes on the system board.
2 Tighten the captive screws that secure the thermal-cooling to the system board.
3 Connect the processor-fan cable to the system board.
Post-requisites
1 Replace the fan shroud.
2 Replace the computer cover.
31
56 Replacing the thermal-cooling assembly
To Next Page
Loading...
