Replacing the memory modules
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the notch on the memory module with the tab on the memory-module slot.
2 Insert the memory module into the memory-module slot and press the memory module down until the securing clips lock in place.
Post-requisites
1 Follow the procedure from step 5 to step 8 in “Replacing the optical drive”.
2 Replace the fan shroud.
3 Replace the front bezel.
17
Replacing the memory modules 35