Replacing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Connect the antenna cables to the wireless card.
2 Align and place the wireless-card bracket on to the wireless card.
3 Align the notch on the wireless card with the tab on the wireless-card slot and slide the wireless card at an angle into the wireless-card
slot.
4 Replace the screw (M2xL3.5) that secures the wireless card to the system board.
Post-requisites
1 Follow the procedure from step 5 to step 8 in “Replacing the optical drive”.
2 Replace the front bezel.
3 Replace the computer cover.
21
Replacing the wireless card 41
To Next Page
Loading...
