Replacing the 3.5-inch hard drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Slide the hard drive into the hard-drive bracket.
2 Align the screw holes on the hard drive with the screw holes on the hard-drive bracket.
3 Replace the two screws (#6-32xL3.6) that secure the hard-drive bracket to the hard drive.
4 Turn the hard-drive assembly over.
5 Slide and place the hard-drive assembly into the drive cage.
13
26 Replacing the 3.5-inch hard drive
To Next Page
Loading...
