Removing the thermal-cooling assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the computer cover.
2 Remove the fan shroud.
Procedure
1 Disconnect the processor-fan cable from the system board.
2 Loosen the captive screws that secure the thermal-cooling assembly to the system board.
3 Lift the thermal-cooling assembly o the system board.
30
Removing the thermal-cooling assembly 55
To Next Page
Loading...
