172 Removing and Installing Parts
Inspiron 530sb/530sd
Place the system board assembly that you just removed next to the
replacement system board to compare and ensure they are identical.
Installing the System Board
1
Gently align the board into the chassis and slide it toward the back of the
computer.
2
Using the screws, secure the system board to the chassis.
3
Replace the cables that you removed from the system board.
4
Replace the processor and the heat sink (see "Installing the Processor" on
page 167).
NOTICE: Ensure that the processor fan/heat sink assembly is correctly seated
and secure.
5
Replace the memory modules into the memory sockets at the same locations
from which you removed them (see "Installing Memory" on page 125).
6
Replace any add-in cards on the system board.
7
Replace the computer cover (see "Replacing the Computer Cover" on
page 174).
1 screws (6) 2 system board
1
2
book.book Page 172 Monday, October 6, 2008 11:38 AM
To Next Page
Loading...
