Removing and Installing Parts 125
Installing Memory
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION: Before installing memory, you must remove the PCI Express x16 card.
See "Cards" on page 128.
NOTICE: To prevent static damage to components inside your computer, discharge
static electricity from your body before you touch any of your computer’s electronic
components. You can do so by touching an unpainted metal surface on the
computer chassis.
1
Follow the procedures in "Before You Begin" on page 103.
2
Press the securing clip at each end of the memory module connector.
Inspiron 530s/530sa/530sc
1 memory connector closest
from processor (DIMM_1)
2 securing clips (2)
3 connector
1
2
3
book.book Page 125 Monday, October 6, 2008 11:38 AM
To Next Page
Loading...
