Dell Inspiron 5593 - Replacing the Power-Adapter Port

Replacing the power-adapter port
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Using the alignment post, place the power-adapter port in the slot on the palm-rest and keyboard assembly.
2. Route the power-adapter port cable through the routing guides on the palm-rest and keyboard assembly.
3. Connect the power-adapter port cable to the system board.
44
Removing and installing components