Dell Inspiron 5593 - Palm-Rest and Keyboard Assembly; Removing the Palm-Rest and Keyboard Assembly

Post-requisites
1. Replace the system board.
2. Replace the wireless card.
3. Replace the heat sink.
4. Replace the fan.
5. Replace the solid-state drive/Intel Optane.
6. Replace the battery.
7. Replace the base cover.
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the fan.
4. Remove the solid-state drive/Intel Optane.
5. Remove the wireless card.
6. Remove the speakers.
7. Remove the hard drive with Intel optane.
58
Removing and installing components