Post-requisites
1. Replace the hard drive with Intel optane..
2. Replace the battery.
3. Replace the base cover.
Coin-cell battery
Removing the coin-cell battery
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended that
you note the BIOS setup program’s settings before removing the coin-cell battery.
Prerequisites
CAUTION:
Removing the coin-cell battery resets the BIOS setup program’s settings to default. Before removing the I/O
board along with the coin-cell battery, it is recommended to note the BIOS setup program’s settings.
1. Remove the base cover.
2. Remove the battery.
3. Remove the I/O board.
Removing and installing components
47
To Next Page
Loading...
