Removing the battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
Remove the base cover.
Procedure
1 Using the pull tab, disconnect the battery cable from the system board.
2 Remove the four screws (M2x3) that secure the battery to the palm-rest assembly and keyboard shield.
3 Lift the battery o the palm-rest assembly.
4 Turn the computer over, open the display, and press and hold the power button for 15 seconds to ground the system board.
5
Removing the battery 15
To Next Page
Loading...
