Replacing the keyboard
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Place the keyboard membrane on the back of the keyboard.
2 Align the keyboard membrane with the folding line and fold the keyboard membrane.
3 Align the screw holes on the keyboard with the screw holes on the palm-rest assembly.
4 Replace the eight screws (M1.2x1.5) that secure the keyboard to the palm-rest assembly.
5 Place the keyboard shield onto the keyboard and align the screw holes on the keyboard shield with the screw holes on the keyboard
and the palm-rest assembly.
6 Replace the 26 screws (M1.4x2) that secure the keyboard shield and the keyboard to the palm-rest assembly.
36
62 Replacing the keyboard
To Next Page
Loading...
