6 Using the pull tab, disconnect the hard-drive cable from the system board.
7 Open the latch and disconnect the touchpad cable from the system board.
8 Disconnect the power-adapter port cable from the system board.
9 Remove the two screws (M2x3) that secure the USB Type-C port bracket to the system board and palm-rest assembly.
10 Lift the USB Type-C port bracket oî the system board.
11 Disconnect the speaker cable from the system board.
12 Open the latch and disconnect the status-light board cable from the system board.
13 Open the latch and disconnect the keyboard cable from the system board.
14 Open the latch and disconnect the keyboard-backlight cable from the system board.
Removing the system board
49
To Next Page
Loading...
