12 Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable.
13 Adhere the tape that secures the I/O-board cable to the system board.
14 Slide the display cable and touch-screen board cable (optional) into their respective connectors on the system board and close the
latches to secure the cables.
15 Adhere the tapes that secure the display cable and touch-screen board cable (optional) to their respective connectors on the system
board.
16 Connect the fan cable to the system board.
52
Replacing the system board
To Next Page
Loading...
