Stand | 17
5
Stand
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Removing the Stand
Prerequisites
Remove the stand cover. See "Removing the Stand Cover" on page 15.
Procedure
1 Remove the screws that secure the stand to the chassis.
2 Pivot the stand upward and slide it away from the computer.
1 stand 2 screws (4)
book.book Page 17 Monday, April 16, 2012 3:04 PM
To Next Page
Loading...
