30 | Converter Board
Replacing the Converter Board
Procedure
1 Align the screw holes on the converter board with the screw holes on the chassis.
2 Replace the screws that secure the converter board to the chassis.
3 Connect the cables to the connectors on the converter board.
Postrequisites
1 Replace the back cover. See "Replacing the Back Cover" on page 20.
2 Replace the stand. See "Replacing the Stand" on page 18.
3 Replace the stand cover. See "Replacing the Stand Cover" on page 16.
4 Follow the instructions in "After Working Inside Your Computer" on page 13.
book.book Page 30 Monday, April 16, 2012 3:04 PM
To Next Page
Loading...
