68 | Processor
7 Clean the thermal grease from the bottom of the processor heat-sink.
8 Apply the new thermal grease to the top of the processor.
CAUTION: Ensure that you apply new thermal grease. New thermal grease is
critical for ensuring adequate thermal bonding, which is a requirement for
optimal processor operation.
Postrequisites
1 Replace the processor heat-sink. See "Replacing the Processor Heat-Sink" on
page 63.
2 Replace the system-board shield. See "Replacing the System-Board Shield" on
page 36.
3 Replace the back cover. See "Replacing the Back Cover" on page 20.
4 Replace the stand. See "Replacing the Stand" on page 18.
5 Replace the stand cover. See "Replacing the Stand Cover" on page 16.
6 Follow the instructions in "After Working Inside Your Computer" on page 13.
book.book Page 68 Monday, April 16, 2012 3:04 PM
To Next Page
Loading...
