Dell Latitude 3180 - Display panel

4 Remove the M2.5x3.5 screws and pry the edges to release the display bezel from the display assembly
Installing display bezel
1 Place the display bezel on the display assembly.
2 Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks on to the display assembly.
3 Replace the M2.0x3.5 screws to secure the display bezel to the display assembly.
4 Ax the hinge cap.
5 Install the:
a battery
b base cover
c microSD card
6 Follow the procedure in After working inside your computer
Display panel
Removing display panel
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a microSD card
b base cover
c battery
d display assembly
e display bezel
24
Removing and installing components