Installing speakers
1 Place the speakers into the slots on the computer.
2 Route the speaker cable through the retention clips through routing channel.
3 Ax the adhesive tape to secure the speaker cable on the computer.
4 Connect the speaker cable to the connector on the system board.
5 Install the:
a battery
b base cover
c microSD card
6 Follow the procedure in After working inside your computer.
System board
Removing system board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a microSD card
b base cover
c battery
d SSD card
3 Disconnect the following cables:
a audio cable [1]
b keyboard cable [2]
c touch pad cable [3]
18
Removing and installing components
To Next Page
Loading...
