Installing the SIM card
1. Insert the SIM card into the slot on the computer and press until it clicks in place.
2. Install the battery.
3. Follow the procedure in After working inside your computer.
Removing the base cover
1. Follow the procedure in Before working inside your computer.
2. Remove the battery.
3. To remove the base cover:
a. Remove the screws that secure the base cover to the computer.
b. Using a plastic scribe, lift the edges of the base cover, and then remove the base cover from the
computer.
Installing the base cover
1. Align the edges of the base cover with the computer and press it until it clicks into place.
2. Tighten the screws to secure the base cover to the computer.
3. Install the battery.
4. Follow the procedure in After working inside your computer.
Removing a memory module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. battery
b. base cover
10
To Next Page
Loading...
